Just me maybe & others are welcome to disagree. But in the circumstances considering i'm guessing you had it timed close to correct when points replaced, i'd just open them to a nipping 15 on the feeler gauge & go try it. Timing should be in the ball park or closer. Just be sure you're checking the gat correctly. Opening 'or just moving' is when the pointer & knotch in the window align--which i'm sure you know--so max open gap is about when that slot gets around with points still visible to poke a feeler blade in. I'm slightly guessing the last comment not having my bike in front of me. With practice--60+ years of it lol--you get good at eyeballing gap & moment of opening. Probably 65 years if i count my 125 excelsior when i was 11 haha.

Hey RT325, using the multi meter on the Rx1 setting it appears my pointer and mark are not correct so going by that would be a no go.  PM sent.

RT on the right track. It is def. electrical.

Coil or condenser. I am betting condenser.

cliff

I'm gonna look silly if i'm not on the right track haha.

Yep got the PM not that i know what i'm doing. Let's know if pics i sent you didn't arrive, mind you i cant insert them here at the mo but a link to a video might work.

Thank you RT325, gonna have my coffee to get in the proper frame of mind to tackle this. 

We have success!!!  Following RT325's (Morely) instructions along with the caution of Mark T's using the multi meter with the Rx1 setting I have set the points to just start open when the timing marks align and now she runs like a bored 1st over, ported with a large carb on it should.  I can actually get the front wheel off the ground and not having to pull on the bars.  To recap, my points weren't opening, I couldn't even see them move when rotating the flywheel so with the help of this forum and and a couple select peeps I'm now happy Thank you ALL!

Great news!!! Enjoy your day of riding and doing wheelies!!!

Nice job! 

Thank you guys!  Now I can get back to fine tuning the carb but I believe it is really close.  Pulled the plug after a nice ride around town and it looks pretty good, maybe slightly lean but will give it some more run time since it was a new plug.