facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

'79 IT175 Squish band

  • davidivjak
  • davidivjak's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 23
  • Likes received: 4

'79 IT175 Squish band was created by davidivjak

Hey guys,

I just bought a '79 IT175 with low miles and very good condition all in all! It has been collecting dust in a garage for years before I pulled it out, so I took of the top end before trying to start it. I inspected and cleaned everything, it still has standard piston and cylinder surface looks really good. After reassembling I measured the squish band and got something about 2,0mm-ish. In my opinion that's a lot, but I am entirely new to the IT-world. In our RDs we aim for 1,2-1,4mm. Luckily the spec sheets say how much the combustion chamber volume it should have, but nothing about the squish band.

So what do you guys aim for? What would you suggest?
Thanks!!

Kind regards,
David
'81 DT175MX | '72 R5F | '82 RD350LC | '79 IT175F | '74 MX175A | '78 YZ125E
22 Nov 2026 01:06 #1

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart