×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Brand New Yamaha Petcocks for our bikes!
- Dave Schaub
- Offline
- Senior Member
- Posts: 47
- Likes received: 6
Replied by Dave Schaub on topic Brand New Yamaha Petcocks for our bikes!
My 1977 dt 400 goes to the left and is part # 1m1-24500-03-00 does one of these cross ?
28 Sep 2015 16:54
#31
Please Log in or Create an account to join the conversation.
- Makotosun
- Topic Author
- Offline
- Administrator
Replied by Makotosun on topic Brand New Yamaha Petcocks for our bikes!
Can you post up a picture of what it looks like? I think if I recall that it needs to extend down from the tank a bit more than the one pictured above in order to clear the tank seam. If that is correct, then you need one kind of like the TW200 uses. Here are the part numbers that DEET posted up as being generally compatible. Note that the one that has the handle down a bit has a slightly smaller flow:
23F-24500-00-00
List $16.02, Net $12.09
Outlet: 6mm (3/16")
Handle sits about an inch below the tank
Right side outlet
3JN-24500-02-00
List $17, Net $12.15
Outlet: 7mm (1/4")
Handle is close to tank
Right side outlet
2GU-24500-02-00
List $26.77, Net $18.59
Outlet: 8mm (5/16")
Handle is close to tank
Right side outlet
23F-24500-00-00
List $16.02, Net $12.09
Outlet: 6mm (3/16")
Handle sits about an inch below the tank
Right side outlet
3JN-24500-02-00
List $17, Net $12.15
Outlet: 7mm (1/4")
Handle is close to tank
Right side outlet
2GU-24500-02-00
List $26.77, Net $18.59
Outlet: 8mm (5/16")
Handle is close to tank
Right side outlet
IF it isn't one thing, it's another.
The following user(s) Liked this Post: TreasureState
28 Sep 2015 17:21
#32
Please Log in or Create an account to join the conversation.
- johbru
- Offline
- Junior Member
- Posts: 29
- Likes received: 2
Replied by johbru on topic Re:Brand New Yamaha Petcocks for our bikes!
Where was this a week ago lol I need to look though this site before I buy any other parts for my bike
Sent from my Nexus 6 using Tapatalk
Sent from my Nexus 6 using Tapatalk
28 Sep 2015 23:45
#33
Please Log in or Create an account to join the conversation.
- Makotosun
- Topic Author
- Offline
- Administrator
Replied by Makotosun on topic Re:Brand New Yamaha Petcocks for our bikes!
We're here for you, Bro! Most all of us have been in the same boat, which is one of the reasons this site exists - to help folks avoid the (sometimes very expensive) mistakes others have made.
IF it isn't one thing, it's another.
The following user(s) Liked this Post: johbru
29 Sep 2015 08:00
#34
Please Log in or Create an account to join the conversation.
- Dave Schaub
- Offline
- Senior Member
- Posts: 47
- Likes received: 6
Replied by Dave Schaub on topic Brand New Yamaha Petcocks for our bikes!
55x-24500-02-00 looks like it would work but don't have specs,Thanks
29 Sep 2015 17:02
#35
Please Log in or Create an account to join the conversation.
- Devin
- Offline
- Supporting Moderator
Replied by Devin on topic Brand New Yamaha Petcocks for our bikes!
Rendering Error in layout Message/Item: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=351314312345&version=889&trackingid=&trackingpartnercode=9): failed to open stream: Connection refused. Please enable debug mode for more information.
Please Log in or Create an account to join the conversation.
- Devin
- Offline
- Supporting Moderator
Replied by Devin on topic Brand New Yamaha Petcocks for our bikes!
shown on 1978 DT400E tank
The following user(s) Liked this Post: Dave Schaub
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- RhinoDT
- Offline
- New Member
- Posts: 5
- Likes received: 1
Replied by RhinoDT on topic Brand New Yamaha Petcocks for our bikes!
FWIW, the 3JN-24500-02-00 petcock can be used in lots of other non Yamaha applications, can be used also to rid yourself of a faulty vacuum operated petcock as long as the vacuum port is plugged.
The following user(s) Liked this Post: Makotosun
25 Nov 2015 10:12
#38
Please Log in or Create an account to join the conversation.
- Dave Schaub
- Offline
- Senior Member
- Posts: 47
- Likes received: 6
Replied by Dave Schaub on topic Brand New Yamaha Petcocks for our bikes!
what have you guys used for sealing washers on the mounting screws?
28 Feb 2016 08:38
#39
Please Log in or Create an account to join the conversation.
- Makotosun
- Topic Author
- Offline
- Administrator
Replied by Makotosun on topic Re:Brand New Yamaha Petcocks for our bikes!
Get the factory petcock washers from Yamaha. Still available, and still the best solution! They have a sealing washer built in.
Sent from the Cloud
Sent from the Cloud
IF it isn't one thing, it's another.
The following user(s) Liked this Post: Dave Schaub, TreasureState
28 Feb 2016 22:40
#40
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart