×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Oil leak from an unknown place
- yam-fan
- Offline
- User is blocked
- Posts: 111
- Likes received: 27
Replied by yam-fan on topic Oil leak from an unknown place
It's leaking as the rubber covered selector fork shaft, blanking plug looks like it has been replaced with a piece of aluminium rod?
If you want to get the plug out, then drilling a hole into it, threading in a self tapping screw, and gripping the screw with a mole wrench should do it.
Might still be possible to get the OE blanking plugs, but it not an alloy plug epoxied in will work fine.
If you want to get the plug out, then drilling a hole into it, threading in a self tapping screw, and gripping the screw with a mole wrench should do it.
Might still be possible to get the OE blanking plugs, but it not an alloy plug epoxied in will work fine.
19 Aug 2023 11:39
#11
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1311
- Likes received: 1059
Replied by 1971DT250 on topic Oil leak from an unknown place
The hours spent riding my Enduros is not deducted from my life span.
19 Aug 2023 12:37
#12
Please Log in or Create an account to join the conversation.
- Ericb1318
- Topic Author
- Offline
- Junior Member
- Posts: 18
- Likes received: 0
Replied by Ericb1318 on topic Oil leak from an unknown place
I thought the same thing about the countershaft leaking too. I pull the sprocket and didn’t see any oil coming from that area. Thanks for the help on the plug! That is a first for me
19 Aug 2023 12:46
#13
Please Log in or Create an account to join the conversation.
- Yamfan
- Offline
- User is blocked
- Posts: 251
- Likes received: 70
Replied by Yamfan on topic Oil leak from an unknown place
Get the alloy plug out before ordering an OE replacement, as it might possibly have been fitted due to the case being damaged.
The following user(s) Liked this Post: Ericb1318
20 Aug 2023 02:45
#14
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart