facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

yamaha gt50 1974 no throttle (help)

  • muxus
  • muxus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 32
  • Likes received: 5

Replied by muxus on topic yamaha gt50 1974 no throttle (help)

Yeah my mistake it was mark
The following user(s) Liked this Post: RT325
04 Jun 2024 15:48 #61

Please Log in or Create an account to join the conversation.

  • Reed valve Richards
  • Reed valve Richards's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 216
  • Likes received: 100

Replied by Reed valve Richards on topic yamaha gt50 1974 no throttle (help)

As Mark said just bolting it on in the correct configuration is a working solution. I suppose you could get the key slot machined but that would be difficult and you could remove and replace the magnets in the new position (I saw some guy did it with jb weld but ?????)
Yo Joe, Go Joe
04 Jun 2024 19:06 #62

Please Log in or Create an account to join the conversation.

  • muxus
  • muxus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 32
  • Likes received: 5

Replied by muxus on topic yamaha gt50 1974 no throttle (help)

I don't want to mess with it risking breaking something. Question is it normal when a gear is on and you push the cluch lever to still have a tiny bit of resistance ? Not quite as free when you don't have a gear on.
05 Jun 2024 10:46 #63

Please Log in or Create an account to join the conversation.

  • Posts: 14446
  • Likes received: 10686

Replied by MarkT on topic yamaha gt50 1974 no throttle (help)

Yes, there will be a little drag when pushing in gear with clutch lever pulled.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
05 Jun 2024 14:24 #64

Please Log in or Create an account to join the conversation.

  • muxus
  • muxus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 32
  • Likes received: 5

Replied by muxus on topic yamaha gt50 1974 no throttle (help)

Ohh thank god i had to remove the cluch actuator screw and was not sure if it was normal or not.
Last edit: 05 Jun 2024 15:04 by muxus.
05 Jun 2024 15:04 #65

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, Mini Enduro Man, James Hart