i see the part is available,  how tough is it to change the little round window oil gauge on a ct2? does it just pop in there?

www.yamaha-enduros.com/index.php/forums/...l-tank-window#143317

Couple of options there on previous search.  I pushed mine in and removed it from the filler on top.  Just pushed in the new one with a bit of oil making sure lips goes well in all around.

I have done 3 in the last couple months. Drill a small hole in center for a sheetrock screw and heat a little with a hair dryer, use vise grips and pull it out. Heat new one it a little (warm not hot) with hairdryer and I use silicon spray and push it in.

thanks for tip. ill try it.
 

thanks for the help!