I got an email today from a guy who has built a few pipes for me and he has been missing in action for quite a while, he let me know that he will be doing a pipe for my '79 DT400 next month   If there are any other Australians that are looking to get a pipe done(Aus pipes are different to US) for their '79-81 Australian delivered DT400 let me know and I'll see if he can knock out multiples at the same time whilst he has my bike there   Pic is of pipes he built for my '75 TS400 and my sons  '80 dt175.

This image is hidden for guests.
Please log in or register to see it.

I won't ask again, If you're local and would like one of these pipes shoot me a message.

Dropped the bike off today to get the Can made Will post pics after next weekend when the pipe is complete

Will post better pics when I get it home

This image is hidden for guests.
Please log in or register to see it.

This image is hidden for guests.
Please log in or register to see it.

Cleaned and painted with some clear ceramic paint(so the can says), If it's all dry tomorrow I'll fit, start and upload a vid of it running if I get time

This image is hidden for guests.
Please log in or register to see it.

This image is hidden for guests.
Please log in or register to see it.

Hopefully get out and play with the jetting on the weekend. It had a 190 main in it before and ran quite nice It's overkill but I'm going to start at 280 and work my way back, I'd rather it was fat than a holed piston.