×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT3 countershaft seal source
- Phyllo
- Topic Author
- Offline
- Premium Member
- Posts: 94
- Likes received: 33
DT3 countershaft seal source was created by Phyllo
Looks like there are no OEM countershaft (sprocket) seals available. Any recommendations? I’ve seen several threads on here with the kit on the red card. Those don’t seem to be there anymore, although there are several other choices.
If anyone has recommendations for a tried and true kit, I’d rather make an informed choice than a shot in the dark…
Thanks!
If anyone has recommendations for a tried and true kit, I’d rather make an informed choice than a shot in the dark…
Thanks!
23 Mar 2023 07:52
#1
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4014
- Likes received: 1952
Replied by Gr8uncleal on topic DT3 countershaft seal source
This one?
OIL SEAL (35X62X6-371) for DT3 1972 1973 USA - order at CMSNL
It might still be available from Yamaha. If not, source a seal of these dimensions from a reputable bearings and seals supplier.
OIL SEAL (35X62X6-371) for DT3 1972 1973 USA - order at CMSNL
It might still be available from Yamaha. If not, source a seal of these dimensions from a reputable bearings and seals supplier.
23 Mar 2023 08:07
#2
Please Log in or Create an account to join the conversation.
- Phyllo
- Topic Author
- Offline
- Premium Member
- Posts: 94
- Likes received: 33
Replied by Phyllo on topic DT3 countershaft seal source
Hey Unc, thanks for your quick response! I’ll have to do a little digging to see if that’s the right one. Is there a listing by dimensions for the seals somewhere?
I would just as soon get a full kit if someone knows of a good one.
I would just as soon get a full kit if someone knows of a good one.
23 Mar 2023 08:15
#3
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4014
- Likes received: 1952
Replied by Gr8uncleal on topic DT3 countershaft seal source
Sometimes the dimensions are shown alongside the part number within the parts list - if you've clicked on my link, you'll see them. Alternatively, you can search a part number on CMSNL, fleabay, Partzilla etc and, if there are photographs, the dimensions will be shown on the seal itself. Always view multiple listings, just to check that someone hasn't made an error in the listing.
Here in the UK, a lot of people use a company called Simply Bearings, and you can input the dimensions of any seal to see if they can supply it.
Here in the UK, a lot of people use a company called Simply Bearings, and you can input the dimensions of any seal to see if they can supply it.
23 Mar 2023 08:24
#4
Please Log in or Create an account to join the conversation.
- Phyllo
- Topic Author
- Offline
- Premium Member
- Posts: 94
- Likes received: 33
Replied by Phyllo on topic DT3 countershaft seal source
Thanks for this info, will check it out in greater detail later today.
23 Mar 2023 08:35
#5
Please Log in or Create an account to join the conversation.
- DEET
- Offline
- Moderator
- Posts: 1408
- Likes received: 1294
Replied by DEET on topic DT3 countershaft seal source
I have plenty of those if you can't find what you need.
All genuine Yamaha.
All genuine Yamaha.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Where the Yamaha Enduro is still a current model...
Where the Yamaha Enduro is still a current model...
The following user(s) Liked this Post: Ht1kid, msavitt
23 Mar 2023 09:31
#6
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart