facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Dt3 timing trouble

  • Posts: 9691
  • Likes received: 3950

Replied by RT325 on topic Dt3 timing trouble

Blimey that was years ago haha, & piston port which i miss & should never have sold. Do ya like my way of locking the gear lever to the shaft with stripped splines. 6mm hole drilled so half in the shaft & half in the lever then tapped a 6mm thread, then short allen screw. Looks like a cast steel R5 or RD350 lever. Sorry i'm heading off subject again.
The following user(s) Liked this Post: Sneezles61
21 Sep 2022 01:42 #21

Please Log in or Create an account to join the conversation.

  • bhepp15
  • bhepp15's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 297
  • Likes received: 92

Replied by bhepp15 on topic Dt3 timing trouble

Update: 3/8 impact got be to about 42 ft lbs, I torqued it to 50 after that with a strap wrench 
The following user(s) Liked this Post: AirborneSilva, Ht1kid, Sneezles61, Tom P
21 Sep 2022 17:57 #22

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart