facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

21 inch front wheel for dt2-3

  • 63406nova@gmail.com
  • 63406nova@gmail.com's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Likes received: 0

21 inch front wheel for dt2-3 was created by 63406nova@gmail.com

what 21 inch wheel will fit on my dt2 ? 
07 Apr 2021 06:24 #1

Please Log in or Create an account to join the conversation.

  • Posts: 856
  • Likes received: 465

Replied by Swoop56 on topic 21 inch front wheel for dt2-3

A DT/RT3 frontwheel will slot straight in .
If you retain the DT2 brake plate , the gearing for the speedo drive will
be a bit off . Actually it may read closer to correct than stock , but odo
readings will read slow . If you still have the original low front guard ,
obviously clearance between the tyre and guard will be reduced .
07 Apr 2021 13:40 #2

Please Log in or Create an account to join the conversation.

  • Posts: 514
  • Likes received: 267

Replied by RTD2 on topic 21 inch front wheel for dt2-3

I have a 21 inch on my RT1 with the stock front fender and the clearance is fine.  I wouldn't want to ride it in mud, but for normal riding there is no issue with putting a 21 inch tire on the RT1/2 DT1? 
68 DT1, 70 DT1C MX, 71 CT1C, 71 RT1B, 71 DT1E MX, 73 AT3MX, 70 Husqvarna 250 Cross, 57 Matchless G80CS, 76 Honda Elsinore; 2015 Yamaha FZ-09; 2021 KTM 500 EXC-W
The following user(s) Liked this Post: Swoop56
07 Apr 2021 15:34 #3

Please Log in or Create an account to join the conversation.

Moderators: yamadminEnduronutMakotosunDEETVinnieDevinJames Hart