facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Soot on front fender-still learning

  • Timcat
  • Timcat's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Likes received: 0

Soot on front fender-still learning was created by Timcat

Hello, I noticed after rides on my 72'RT 360 there is soot on the rear of the front fender. Is this normal or due I need a new gasket, or should I be more concerned and this is a more serious issue? Thanks Tim
24 Aug 2020 14:52 #1

Please Log in or Create an account to join the conversation.

  • Posts: 1355
  • Likes received: 1148

Replied by 1971DT250 on topic Soot on front fender-still learning

Not unusual. A new string gasket will make it better. Be sure to clean out the old one. You can take the manifold off and separate the inner piece from the outer but the 2 bolts are likely rusted in the cylinder. Easy to break them. The string gasket is available, I use 2 loops. It may still spit a little.
The hours spent riding my Enduros is not deducted from my life span.
24 Aug 2020 15:09 #2

Please Log in or Create an account to join the conversation.

  • Timcat
  • Timcat's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Likes received: 0

Replied by Timcat on topic Soot on front fender-still learning

Thanks
24 Aug 2020 15:13 #3

Please Log in or Create an account to join the conversation.

  • MarkT
  • MarkT's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 14453
  • Likes received: 10689

Replied by MarkT on topic Soot on front fender-still learning

I'd like to add to check and make sure it's not the head or base gasket leaking... but usually it's normal.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
24 Aug 2020 16:14 #4

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart