facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Does anyone know what these fit?

  • Crowvet
  • Crowvet's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 84
  • Likes received: 94

Does anyone know what these fit? was created by Crowvet

cleaning up, does anyone know what these parts fit? Looks like a pretty small bike.
14 Aug 2020 09:26 #1

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 4016
  • Likes received: 1952

Replied by Gr8uncleal on topic Does anyone know what these fit?

The crankcase should have a number, or series of numbers, stamped on the inside. Can you post a photo of the inside?

The light and the red lens should maker and model numbers stamped on them - could you post these?
14 Aug 2020 11:17 #2

Please Log in or Create an account to join the conversation.

  • Posts: 779
  • Likes received: 860

Replied by apex on topic Does anyone know what these fit?

Case cover looks like '69-'71 CT1, 175. Triple clamp looks smooth and is unpainted, I would guess '69 AT1/CT1. License plate bracket looks '69/'70 AT1/CT1. Taillamp does not look Yamaha.
Allrighty Then
15 Aug 2020 09:10 #3

Please Log in or Create an account to join the conversation.

  • Posts: 13487
  • Likes received: 9345

Replied by MarkT on topic Does anyone know what these fit?

I was thinking the same thing... but I had a NOS HT1 cover I sold to a member here a couple years ago that I initially thought was AT/CT but was just a little smaller... of course the AT would have the taller generator ignition cover section... if it had that it would be certain ID... but with the mag cover I'm not sure.

Without some measurements I wouldn't even guess... Taillight could be Yamaha from a later model... kind of looks like my 88 DT50 light a little.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
15 Aug 2020 09:21 #4

Please Log in or Create an account to join the conversation.

  • Crowvet
  • Crowvet's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 84
  • Likes received: 94

Replied by Crowvet on topic Does anyone know what these fit?

No stamps inside the crankcase cover, none on the triple clamp, taillight bracket does have some markings, I will post them later. Taillight has the typical sae blah blah blah stamps but nothing that I think would be identifying
16 Aug 2020 09:37 #5

Please Log in or Create an account to join the conversation.

  • Posts: 327
  • Likes received: 279

Replied by Lizeec on topic Does anyone know what these fit?

The LH case cover looks like a 1973 LT3, at least to me it looks like the cover on this bike for sale on eBay, possibly the upper triple tree clamp as well? Also possibly a 1969-1970 CT-1


Winner Winner Chicken Dinner?
Last edit: 16 Aug 2020 15:02 by Lizeec.
16 Aug 2020 11:38 #6

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 4016
  • Likes received: 1952

Replied by Gr8uncleal on topic Does anyone know what these fit?


Pretty certain there will be a stamp in the casting. If LT3, this is likely to be 27600 and might be covered in crud.

I would type the SAE number into fleabay to see if any seller is quoting that in a listing and then work on that.
16 Aug 2020 11:59 #7

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart