×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Yamaha Enduro Seat
- htw123hotmail
- Topic Author
- Offline
- Junior Member
- Posts: 22
- Likes received: 1
Yamaha Enduro Seat was created by htw123hotmail
I have a beautiful seat for a Yamaha Enduro that I have but it doesn't fit my AT1 or my DT2 and I don't know what it fits. The cover, foam and pan are beautiful. Here are the dimensions: 11.5" wide, 19" long, hinge brackets are 6 1/3" apart. Seat is complete with rubber cushions, rod, etc. Condition is like new and I'll give someone a great deal if they think they can use it.
Any help on figuring out what bike this fits would be appreciated!
Any help on figuring out what bike this fits would be appreciated!
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1659
- Likes received: 1054
Replied by Mothersbaugh on topic Yamaha Enduro Seat
Just on appearance, my own CT-2 being out at a storage unit, I'm guessing CT-2/3 or AT-2/3. Not the least bit of evidence being the square battery imprint which would have had a piece of foam glued to it originally...
What do I win?
What do I win?
13 May 2020 21:49
#2
Please Log in or Create an account to join the conversation.
- bsfullthrottleCujosmith1
- Offline
- Junior Member
- Posts: 19
- Likes received: 1
Replied by bsfullthrottleCujosmith1 on topic Yamaha Enduro Seat
It seems to have the same measurements as the 1971 360 rt ,but it looks like the wrong foam cushion. How much are you asking for it ?
14 May 2020 06:18
#3
Please Log in or Create an account to join the conversation.
- bsfullthrottleCujosmith1
- Offline
- Junior Member
- Posts: 19
- Likes received: 1
Replied by bsfullthrottleCujosmith1 on topic Yamaha Enduro Seat
OOOPS! Sorry everyone ! After looking at my 360 seat pan , I see its not for the 1971 360 rt , sorry for the mislead .
The following user(s) Liked this Post: FrankC
14 May 2020 06:24
#4
Please Log in or Create an account to join the conversation.
- Free
- Offline
- Junior Member
- Posts: 16
- Likes received: 0
Replied by Free on topic Yamaha Enduro Seat
The seat that came on my bike fit fine ....however I decided to pull out the welding rod holding it in place to put in the real pins....just noticed the seat mounts don't line up where the hinges should be.
1975 DT175
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart