facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Pulsar done - What are my options?

  • Posts: 14446
  • Likes received: 10686

Replied by MarkT on topic Pulsar done - What are my options?

Some people are happy with the Rex system... others have had issues. That might have been more about the early systems? I don't know. If you search you might find more info.

Powerdynamo/VAPE is a good system. Best price is usually buy direct.

Another good option is points system from DT250.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
10 May 2020 21:39 #11

Please Log in or Create an account to join the conversation.

  • Posts: 367
  • Likes received: 331

Replied by JayB on topic Pulsar done - What are my options?


The VAPE comes with a new flywheel/rotor. As I understand it, there is no keyway in the supplied flywheel and you don't use a key when you mount it on the crankshaft. That means you have to retime it every time you remove/install the flywheel. Possibly you could order it with a keyway or have one cut by a local machinist. Or do without and retime it when you remove the flywheel, which should not be necessary very often since you have a new CDI system and you put in a brand new seal behind it!
11 May 2020 06:41 #12

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart