facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Ht1 clutch wont engage

  • jbrundy
  • jbrundy's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Likes received: 0

Ht1 clutch wont engage was created by jbrundy

I bought an pretty used ht1 that won't run and decided to fix it up during carona virus. I noticed that the the clutch wont engage so I took off the panel to adjust the pin and that didnt do it so I took a look at the actual clutch and tried to push the pin as hard as possible and it still wont engage. took apart the clutch, took off springs bolts everything, no corrosion, so reassembled it and same thing, pin doesnt have enough force to engage it and push the springs, im thinking the springs are too tight? any help would be appreciated.
28 Mar 2020 01:14 #1

Please Log in or Create an account to join the conversation.

  • Posts: 4677
  • Likes received: 2512

Replied by Gr8uncleal on topic Ht1 clutch wont engage

Welcome! from the UK.

Is the ball bearing present (sits at the far end of the pushrod)?
28 Mar 2020 01:52 #2

Please Log in or Create an account to join the conversation.

  • Posts: 10818
  • Likes received: 4688

Replied by RT325 on topic Ht1 clutch wont engage

Sounds like your getting wires crossed & mean "disengage"?. If so then if you have the clutch cover off the when you pull the lever on the handlebar then you should see the clutch separate. If it lifts & doesn't separate then sounds like the plates are all stuck together which is common after sitting for a long time [years]. If the pushrod is adjusted in the left cover & feels [& looks] like its working--then, stuck together is my bet. Umm, if on the other hand i'm up the creek & it won't drive then its likely burnt out in the fiber plates but would stink to high heaven in there. Sorry if i've got the story wrong. My turn to make a cuppa [in lock down]--yes dear right away.
Last edit: 28 Mar 2020 02:47 by RT325.
28 Mar 2020 02:20 #3

Please Log in or Create an account to join the conversation.

  • Posts: 10818
  • Likes received: 4688

Replied by RT325 on topic Ht1 clutch wont engage

My old HT1 as found after year leaning against an overgrown bank besides a road & out in all weathers. Ran well with little work except fix the rotten header pipe & chain & sprockets i had lying around. Motor was stuck but freed up. good for 55mph anyday down our road. Hope you get yours up & running soon. Found a terrible video of mine running up the road. Fell in love with them when i assembled the first one at work in 1970. Sorry if i'm clogging up your post & happy to remove. Cheers.
28 Mar 2020 03:10 #4

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 4677
  • Likes received: 2512

Replied by Gr8uncleal on topic Ht1 clutch wont engage


Cup of tea, this time of the evening............?!:EEEK
28 Mar 2020 03:14 #5

Please Log in or Create an account to join the conversation.

  • Posts: 10818
  • Likes received: 4688

Replied by RT325 on topic Ht1 clutch wont engage

Cuppa tea & catching up on Coro street lol. No hope for us. Not missed one since Ena Sharples, Mini Caldwell & Martha Longhurst plus Bobby the cat in the "60's. Sorry--ya probably too young to have heard of them haha.
Last edit: 28 Mar 2020 04:44 by RT325.
28 Mar 2020 04:43 #6

Please Log in or Create an account to join the conversation.

  • Posts: 4677
  • Likes received: 2512

Replied by Gr8uncleal on topic Ht1 clutch wont engage

Nope, I'm old enough (just!) to remember when Corrie first started. I've never been a fan of any soap, mind (boo!).
28 Mar 2020 05:42 #7

Please Log in or Create an account to join the conversation.

Moderators: yamadminMakotosunDEETVinnieJames Hart