facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Name this part?

  • WillyH
  • WillyH's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 26
  • Likes received: 7

Name this part? was created by WillyH

I don't think this goes to my 74 DT360 but not sure what else it could be to. Definitely an exhaust part. It is 2 inches high and 1 inch in diameter.

Might be Suzuki DR370, Kawasaki KLX300R, Beemer scooter....? Maybe I should just pitch it, but then a day later I'd need it.
Last edit: 27 Feb 2020 16:09 by WillyH.
27 Feb 2020 16:07 #1

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 2141
  • Likes received: 1413

Replied by mdscott on topic Name this part?

Its a black flat piece of metal fashioned into a cylinder shaped object, thats what I would name it.
:ROFLOL
Thanks Mark
Roseville, Ca.

'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
27 Feb 2020 16:47 #2

Please Log in or Create an account to join the conversation.

  • Posts: 9780
  • Likes received: 3998

Replied by RT325 on topic Name this part?

Well it doesn't go on top of the fork spring like i thought it did at first glance. Spot welds & tapered slightly makes me think exhaust but doubt DT360A. I give up, just don't scrap it lol.
27 Feb 2020 17:34 #3

Please Log in or Create an account to join the conversation.

  • WillyH
  • WillyH's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 26
  • Likes received: 7

Replied by WillyH on topic Name this part?

I think I am going with springy exhaust thingy.
27 Feb 2020 19:07 #4

Please Log in or Create an account to join the conversation.

  • Posts: 487
  • Likes received: 310

Replied by RTD2 on topic Name this part?

The smart ass answer would be Bob, but I like "springy exhaust thingy." I would have guessed top spacer
on a 34mm fork, but clearly that has already been rejected.

Mike
68 DT1, 70 DT1C MX, 70 Husqvarna 250 Cross; 71 CT1C, 71 RT1B, 71 DT1E MX, 73 AT3MX, 73 MX360, 76 Honda Elsinore; 2021 KTM 500 EXC-W; 2001 Honda XR400R; 2007 Harley Davidson Sportster 1200
28 Feb 2020 13:50 #5

Please Log in or Create an account to join the conversation.

  • Posts: 1338
  • Likes received: 1583

Replied by Schu on topic Name this part?

I think that's a 1 inch diameter x 2 inch long split spring tension roll pin.
You won't find that one at Home Depot.
Schu

CT1B, CT1C, JT1, JT2, DT360A, GT80B, DT100B, DT125B,
DT175B, DT175C, DT250B, DT400B, Z50, SCR950

Someday, you'll own some Yamahas
28 Feb 2020 15:44 #6

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart