×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Where to get fork parts?
- FrankC
- Topic Author
- Offline
- Solution Contributor
- Posts: 1190
- Likes received: 374
Where to get fork parts? was created by FrankC
Just wondering if anybody has a handle on getting the lower damper rod slider bushing. I have a 78 dt400 for which I need a couple. Would like to get heavier duty fork springs as well? Thanks brothers.
27 Dec 2019 17:10
#1
Please Log in or Create an account to join the conversation.
- Rick C.
- Offline
- Platinum Member
- Posts: 1082
- Likes received: 915
Replied by Rick C. on topic Where to get fork parts?
Hey Frank, I have some 78' 250 forks here. I think its the same part number as the 400. if you just want to swap out.
Gotta check on that.
Edit: yep, same part number. 1M1-23101-40-00
Aren't you in Simi Valley?
Gotta check on that.
Edit: yep, same part number. 1M1-23101-40-00
Aren't you in Simi Valley?
Please Log in or Create an account to join the conversation.
- FrankC
- Topic Author
- Offline
- Solution Contributor
- Posts: 1190
- Likes received: 374
Replied by FrankC on topic Where to get fork parts?
Yes, I sure am. Thank you for the offer. I am not prepared to jump on something just yet, I will need much more work coming up as it declined greatly during the Christmas season. But still I am wondering if anyone makes the slider bushing.
27 Dec 2019 19:53
#3
Please Log in or Create an account to join the conversation.
- Rick C.
- Offline
- Platinum Member
- Posts: 1082
- Likes received: 915
Replied by Rick C. on topic Where to get fork parts?
For you buddy, Cheap !
Say 40 bucks !?! I will hold them for you or you can come get them and pay later, when you can..Gotta ride !
I'm around the corner from you, Santa Clarita.
Only if you want to go this route. no pressure.
You mean the small split white gizmo?
Say 40 bucks !?! I will hold them for you or you can come get them and pay later, when you can..Gotta ride !
I'm around the corner from you, Santa Clarita.
Only if you want to go this route. no pressure.
You mean the small split white gizmo?
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- FrankC
- Topic Author
- Offline
- Solution Contributor
- Posts: 1190
- Likes received: 374
Replied by FrankC on topic Where to get fork parts?
If you wouldn't mind holding those? I would love having the leading front axle.
28 Dec 2019 11:08
#5
Please Log in or Create an account to join the conversation.
- Rick C.
- Offline
- Platinum Member
- Posts: 1082
- Likes received: 915
Replied by Rick C. on topic Where to get fork parts?
Piece o' cake, Brother !
The following user(s) Liked this Post: FrankC
28 Dec 2019 13:30
#6
Please Log in or Create an account to join the conversation.
- mdscott
- Offline
- Site Supporter
- Posts: 2141
- Likes received: 1413
Replied by mdscott on topic Where to get fork parts?
I may be wrong here but putting on a leading axle front forks on a bike that didn't have it might goof up the steering geometry. The rake and trail dimension are figured in with the triple tree and clamp.
78 DT400 were not leading forks.
Maybe some others can chime in about this.
78 DT400 were not leading forks.
Maybe some others can chime in about this.
Thanks Mark
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
The following user(s) Liked this Post: FrankC
28 Dec 2019 15:38
#7
Please Log in or Create an account to join the conversation.
- FrankC
- Topic Author
- Offline
- Solution Contributor
- Posts: 1190
- Likes received: 374
Replied by FrankC on topic Where to get fork parts?
I would need the tripple clamps to use them. Well I do have a nice patina going on the old fork sliders. They sort of yellowed with age.
28 Dec 2019 17:43
#8
Please Log in or Create an account to join the conversation.
- KennyV
- Offline
- Site Supporter
- Posts: 614
- Likes received: 516
Replied by KennyV on topic Where to get fork parts?
The triple clamps for the leading axle forks might alow the forks to hit your gas tank. I ran into this with my XT500. I have a set of leading axle forks from a later model and with the matching triple clamps the forks hit the gas tank. Looking at the gas tank for later model, it's shaped much different.
71 Z50 Minitrail
20 CB500X Halfrica Twin
21 CRF300l Rally
20 CB500X Halfrica Twin
21 CRF300l Rally
28 Dec 2019 17:56
#9
Please Log in or Create an account to join the conversation.
- FrankC
- Topic Author
- Offline
- Solution Contributor
- Posts: 1190
- Likes received: 374
Replied by FrankC on topic Where to get fork parts?
It was a nice thing for Rick to offer those 2 me. Thank you guys for the input. Will see how it goes. Rick just curious if those forks are 34 mm or 35? Might be worth adapting them if the tank clears.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart