×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT250 Side Stand Bracket
- Hankish
- Offline
- New Member
- Posts: 7
- Likes received: 4
Replied by Hankish on topic DT250 Side Stand Bracket
I have a 76 250 that looks like the kickstand broke off. I need a fix for this.
17 Sep 2016 20:35
#11
Please Log in or Create an account to join the conversation.
- Tory
- Offline
- Junior Member
- Posts: 21
- Likes received: 4
Replied by Tory on topic DT250 Side Stand Bracket
I also amin need for one of these. I would be interested when you have it sorted out, Even if I have to figure out the pin on my own, Keep us posted please.
04 Dec 2016 15:36
#12
Please Log in or Create an account to join the conversation.
- TerryM
- Offline
- Site Supporter
- Posts: 285
- Likes received: 149
Replied by TerryM on topic DT250 Side Stand Bracket
Any progress on this fabrication? I'd like to get my side stand sorted out this winter, if possible.
Terry
04 Dec 2016 15:44
#13
Please Log in or Create an account to join the conversation.
- Makotosun
- Offline
- Administrator
Replied by Makotosun on topic DT250 Side Stand Bracket
If you look at the docs for download in the right column of this page, you will see a template for such a bracket which may be a place to start.
yamaha-enduros.com/index.php/workshop/do...and-bracket-template
yamaha-enduros.com/index.php/workshop/do...and-bracket-template
IF it isn't one thing, it's another.
04 Dec 2016 21:40
#14
Please Log in or Create an account to join the conversation.
- Bpekarna
- Offline
- New Member
- Posts: 1
- Likes received: 0
Replied by Bpekarna on topic DT250 Side Stand Bracket
Hi Scott, did you ever make any more of these plates for the kickstand? I just got my hands on my dream bike as a child growing up a 74 DT 250 and its missing a kickstand. The plate is broke off at the weld.
20 Jul 2020 18:56
#15
Please Log in or Create an account to join the conversation.
- mdscott
- Offline
- Site Supporter
- Posts: 2141
- Likes received: 1413
Replied by mdscott on topic DT250 Side Stand Bracket
Just make sure you get the angle right, my DT 360 that was welded was off a little bit. When the handlebars are turned to the right the bike tips over
Thanks Mark
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
14 Aug 2020 10:16
#16
Please Log in or Create an account to join the conversation.
- Icebird1961
- Offline
- New Member
- Posts: 2
- Likes received: 0
Replied by Icebird1961 on topic DT250 Side Stand Bracket
Hello, I have to bring this up again,
as last week also my DT250 Side Stand Bracket broke -
cracked just through the middle of the hole...
The bracket is Obviously not too well engineered...
Could s/o kindly upload the missing pdf link for this bracket template?
Unfortunately the link and the pics in the post are dead...
Kind Rgds.
Edit..
I now managed to d/l the pics and the template on my wifes PC (my IMac didn’t do it...)
and I had a re- read of the whole post, and gladly found this promising post:
“AT6 DRIVER wrote: Terry- I was thinking that same idea. I think making the plate is one part but the pin that the spring attaches to needs to be fabricated as well. If I have a batch of these made up would not be much more work than doing a few for myself- I think I could use 3 or 4 myself. Maybe I could have a machine shop cut these up. I will start doing some checking around to see if I can get it done. I will need to make one sample and than verify it works than make more.
Scott”
Is there any progress on that production been made ?
I’d been over the moon if s/o could fabricate and sell this bracket for me,
as I do not have the needed machinery for this...
and right now I have to lean my beloved DT always against a wall - I need to get his fixed !
as last week also my DT250 Side Stand Bracket broke -
cracked just through the middle of the hole...
The bracket is Obviously not too well engineered...
Could s/o kindly upload the missing pdf link for this bracket template?
Unfortunately the link and the pics in the post are dead...
Kind Rgds.
Edit..
I now managed to d/l the pics and the template on my wifes PC (my IMac didn’t do it...)
and I had a re- read of the whole post, and gladly found this promising post:
“AT6 DRIVER wrote: Terry- I was thinking that same idea. I think making the plate is one part but the pin that the spring attaches to needs to be fabricated as well. If I have a batch of these made up would not be much more work than doing a few for myself- I think I could use 3 or 4 myself. Maybe I could have a machine shop cut these up. I will start doing some checking around to see if I can get it done. I will need to make one sample and than verify it works than make more.
Scott”
Is there any progress on that production been made ?
I’d been over the moon if s/o could fabricate and sell this bracket for me,
as I do not have the needed machinery for this...
and right now I have to lean my beloved DT always against a wall - I need to get his fixed !
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Icebird1961
- Offline
- New Member
- Posts: 2
- Likes received: 0
Replied by Icebird1961 on topic DT250 Side Stand Bracket
On a second thought ...
Do You believe its a good idea, to get a "simpler" Side stand (i.e. 1 piece only) instead of that chunky two parts/ safety Lever piece ? ... as the side stand really shouldn't be over-engineered /rocket science...
btw.- what's that purpose of the 2nd "relieve lever" - just to keep it in its position up there ?
... and still looking for a source for that broken bracket ... any tips appreciated ;-)
Do You believe its a good idea, to get a "simpler" Side stand (i.e. 1 piece only) instead of that chunky two parts/ safety Lever piece ? ... as the side stand really shouldn't be over-engineered /rocket science...
btw.- what's that purpose of the 2nd "relieve lever" - just to keep it in its position up there ?
... and still looking for a source for that broken bracket ... any tips appreciated ;-)
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13503
- Likes received: 9353
Replied by MarkT on topic DT250 Side Stand Bracket
It sounds like someone has modified your side stand. Posting a picture of what you are working with would be helpful
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
01 Nov 2020 09:38
#19
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13503
- Likes received: 9353
Replied by MarkT on topic DT250 Side Stand Bracket
Here's the one of the threads that has the bracket template.
www.yamaha-enduros.com/index.php/forums/...0-side-stand-bracket
(It's actually post 4 of this thread)
www.yamaha-enduros.com/index.php/forums/...0-side-stand-bracket
(It's actually post 4 of this thread)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart