×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Clutch cable not connected at clutch pak
- Huskyking
-
Topic Author
- Offline
- Senior Member
-
- Posts: 42
- Likes received: 16
Clutch cable not connected at clutch pak was created by Huskyking
I am currently going through 73-RT3, in my process of putting front end back together i am installing levers and clutch cable.
I have found that my cable has come completely lose at clutch pack. I can actually remove it out of the case.....
Is this common,and is it a easy proceedure to fix. thanks
I have found that my cable has come completely lose at clutch pack. I can actually remove it out of the case.....
Is this common,and is it a easy proceedure to fix. thanks
10 Aug 2026 10:28
#1
Please Log in or Create an account to join the conversation.
- Gr8uncleal
-
- Offline
- Site Supporter
-
- Posts: 4928
- Likes received: 2689
Replied by Gr8uncleal on topic Clutch cable not connected at clutch pak
10 Aug 2026 10:33
#2
Please Log in or Create an account to join the conversation.
- Huskyking
-
Topic Author
- Offline
- Senior Member
-
- Posts: 42
- Likes received: 16
Replied by Huskyking on topic Clutch cable not connected at clutch pak
not sure what that part is, my situation is that cable can be removed right out of case, it is no longer connected
10 Aug 2026 11:32
#3
Please Log in or Create an account to join the conversation.
- Gr8uncleal
-
- Offline
- Site Supporter
-
- Posts: 4928
- Likes received: 2689
Replied by Gr8uncleal on topic Clutch cable not connected at clutch pak
Better take the cover off and have a look see!
The following user(s) Liked this Post: pabdt
10 Aug 2026 11:46
#4
Please Log in or Create an account to join the conversation.
- Huskyking
-
Topic Author
- Offline
- Senior Member
-
- Posts: 42
- Likes received: 16
Replied by Huskyking on topic Clutch cable not connected at clutch pak
yes for sure, thx
10 Aug 2026 11:56
#5
Please Log in or Create an account to join the conversation.
- RT325
-
- Offline
- Platinum Member
-
- Posts: 11082
- Likes received: 4887
Replied by RT325 on topic Clutch cable not connected at clutch pak
Clutch pack is on the other side. That's your actuator in there. Just pull that cover & sit the cable back in place. Could give the fitting a squeeze to stop cable escaping while doing stuff up at the handlebars. All a learning curve but it'll all become clear when you pull the sprocket cover/actuator holder thingy. Enjoy your time on the site. Plenty of help here & welcome from nz.
10 Aug 2026 15:32
#6
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart
