×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Wanted-CT1 parts
- Bp299
- Topic Author
- Offline
- Junior Member
- Posts: 10
- Likes received: 1
Wanted-CT1 parts was created by Bp299
Looking for the following for my 69 CT1 resto:
OE Carb
Tool kit and riders manual
The following in best condition or possible:
Light/horn switch
Upper front fork tubes (or full set)
Shocks
Handle bar mounts
Speedo and tach housings
Passenger foot pegs
Any other NOS parts you may have stashed away
This image is hidden for guests.
OE Carb
Tool kit and riders manual
The following in best condition or possible:
Light/horn switch
Upper front fork tubes (or full set)
Shocks
Handle bar mounts
Speedo and tach housings
Passenger foot pegs
Any other NOS parts you may have stashed away
This image is hidden for guests.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13513
- Likes received: 9366
Replied by MarkT on topic Wanted-CT1 parts
Some of the parts you're asking about are different depending on exactly which of the 3 CT1 models you have and how original you want to be. You know what you have/want, we don't.
Early light/horn switch is rare and expensive if that's what model you're working on and if you want original. Later switch will work and easier/cheaper to find.
DEET might be able to rechrome speedo/tach... there are differences in housings during the years if I remember correctly. You can swap the whole gauge... just housing? Probably not. (And often gauges aren't correct for the model in the first place)
Early light/horn switch is rare and expensive if that's what model you're working on and if you want original. Later switch will work and easier/cheaper to find.
DEET might be able to rechrome speedo/tach... there are differences in housings during the years if I remember correctly. You can swap the whole gauge... just housing? Probably not. (And often gauges aren't correct for the model in the first place)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
02 Jul 2023 16:15
#2
Please Log in or Create an account to join the conversation.
- Bp299
- Topic Author
- Offline
- Junior Member
- Posts: 10
- Likes received: 1
Replied by Bp299 on topic Wanted-CT1 parts
Sorry, Fixed now- 1969 CT1.
Thanks
Thanks
03 Jul 2023 08:26
#3
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9740
- Likes received: 3983
Replied by RT325 on topic Wanted-CT1 parts
Hey, i used to wear those Scott Goggles with facemask back in 'their' day. Were good too.
The following user(s) Liked this Post: Ht1kid, Bp299
03 Jul 2023 18:54
#4
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart