facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

1972 AT2

  • RS16017
  • RS16017's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Likes received: 0

1972 AT2 was created by RS16017

Picked up an AT2. Water damage to the distributor area. Need to remove the points cam and mechanical advance. Before I start trying to remove the crank bolt. Can someone tell me if it's right or left hand thread. Don't want to break it off in the crankshaft.
05 Oct 2020 09:00 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14456
  • Likes received: 10693

Replied by MarkT on topic 1972 AT2

Very rare for Yamaha to use LH threads. Bolt you're describing is normal RH thread.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
05 Oct 2020 09:07 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart