facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Oil in the combustion chamber

  • Posts: 13519
  • Likes received: 9369

Replied by MarkT on topic Oil in the combustion chamber

Remove the chrome heat shield first if you decide to burn out the pipe... The heat from burning out the pipe may ruin the chrome.

Burning out may not be needed unless your pipe is carboned up.

A good ride is the best thing to start with... usually once it's warmed up good the smoke will clear up.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: DVM, RT325
22 Jan 2021 08:28 #11

Please Log in or Create an account to join the conversation.

  • MK19
  • MK19's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 44
  • Likes received: 2

Replied by MK19 on topic Oil in the combustion chamber

Thanks for all the help, some work to do!
24 Jan 2021 10:04 #12

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart