facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Carb intake clamp

  • Mark350
  • Mark350's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 50
  • Likes received: 36

Carb intake clamp was created by Mark350

Does anyone know if 214-14455-01-00 is for the 1070/72 DT-1/ RT-1 ? This number has been superseded a couple of times . Can't find any original part numbers or listings. Thanks 
17 Apr 2025 09:02 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14133
  • Likes received: 10222

Replied by MarkT on topic Carb intake clamp

What bike do you have?  Seems to be typos in your question or at least I don't understand exactly what you're asking.

250 and 360 are likely to have different clamps and there might be a difference between piston port (through 71) and reed valve (72-73)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
Last edit: 17 Apr 2025 17:19 by MarkT.
17 Apr 2025 17:19 #2

Please Log in or Create an account to join the conversation.

  • Posts: 14133
  • Likes received: 10222

Replied by MarkT on topic Carb intake clamp

Oh and it's goofy but Yamaha lists the carb mounting parts under "air filter" or sometimes "intake" categories. 

www.partzilla.com/catalog/yamaha/motorcy...970/dt1c/air-cleaner
 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
Last edit: 17 Apr 2025 17:43 by MarkT.
17 Apr 2025 17:27 #3

Please Log in or Create an account to join the conversation.

  • Mark350
  • Mark350's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 50
  • Likes received: 36

Replied by Mark350 on topic Carb intake clamp

Sorry, year typo! Is 214-14455-01-00 for the 1970/72 DT-1 or RT-1 ? Piston port motors. Seems both DT-1 /RT-1 use the same superseded part numbers.
17 Apr 2025 18:33 #4

Please Log in or Create an account to join the conversation.

  • Posts: 14133
  • Likes received: 10222

Replied by MarkT on topic Carb intake clamp

72 is reed valve.  Look at the 71 DT1c  Partzilla link I posted.  Clamps for air filter hose are shown and available.  #11 and #9.

(The 214 part number you posted crosses to the new number used for #9)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
18 Apr 2025 00:13 #5

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart