facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Ct-1 ignition coil

  • Posts: 7
  • Likes received: 1

Ct-1 ignition coil was created by YONK

Need some help in identifying this ignition coil I found on eBay. Seller identified it as a ct-3 coil. According to the pictures I see on the parts fishe it looks more like a ct-1 coil to my untrained eye.  Am looking for a ct-1 coil and hoping this one will work but don't want to buy it without being sure.  Any advice will be appreciated. Thanks
07 Mar 2021 07:31 #1

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 9691
  • Likes received: 3950

Replied by RT325 on topic Ct-1 ignition coil

If it mounts on it'll be good. Single wire so is an AC magneto coil. If you have no spark it won't be 'that' coil--in my opinion. Has to be earthed & motor tight in the frame to be well earthed. Bolted to the frame earths it as it earths via the mounting bolts.
07 Mar 2021 15:14 #2

Please Log in or Create an account to join the conversation.

  • Posts: 248
  • Likes received: 205

Replied by Midlife Motor on topic Ct-1 ignition coil

That looks very much like my CT1 coil and nothing like the coil in the CT3 parts diagram.
It's better to remain silent and be considered a fool than to speak and remove all doubt.
07 Mar 2021 15:56 #3

Please Log in or Create an account to join the conversation.

  • Posts: 7
  • Likes received: 1

Replied by YONK on topic Ct-1 ignition coil

Thanks for your thoughts. I bought this bike to restore. Was not running when purchased. There are a lot of parts that were installed on it from other bikes to make it look complete but not functional by seller. Am trying to restore to original and wasn't sure if this coil would work or not. Thinking it is probably ok to use. 
The following user(s) Liked this Post: RT325
08 Mar 2021 09:30 #4

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart