×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Gas flow Issues on my CT1C
- mx360guy
- Topic Author
- Offline
- Elite Member
- Posts: 192
- Likes received: 137
Replied by mx360guy on topic Gas flow Issues on my CT1C
Thanks for the replies. I checked the cap and it is not an issue. Same with the cap off. It does flow but not as much as I would expect. The hose is is about a 1/4 full and stays about the same level while idling and I can see a consistent trickle,. It does drop a bit when I turn the throttle. Can't see when I am riding so I don't know what its doing. And when off road and loading it I don't know what the level is, I don't think its getting enough. The YZ petcock came to me damaged so I had to send it back..The box was crushed. I am still looking at it but have not been able to spend much time on it..
08 Sep 2023 16:30
#11
Please Log in or Create an account to join the conversation.
- automan
- Offline
- Elite Member
- Posts: 171
- Likes received: 50
Replied by automan on topic Gas flow Issues on my CT1C
fugettaboutit
as many have said
cliff
as many have said
cliff
08 Sep 2023 23:21
#12
Please Log in or Create an account to join the conversation.
- Tinkicker
- Offline
- Site Supporter
- Posts: 764
- Likes received: 1044
Replied by Tinkicker on topic Gas flow Issues on my CT1C
Hey. Lenny the Badger. Pass the toothpicks will ya? And whats with the fuggettaboutit? Did your Mama teach you to a speak like a dat?
This image is hidden for guests.
This image is hidden for guests.
Please log in or register to see it.
The following user(s) Liked this Post: Sneezles61
Please Log in or Create an account to join the conversation.
- Sneezles61
- Offline
- Site Supporter
- Posts: 769
- Likes received: 449
Replied by Sneezles61 on topic Gas flow Issues on my CT1C
Drain the tank, pull the petcock off and shove a drill bit into the tubes in the tank… perhaps they are plugged up a bit?
Sneezles61
Sneezles61
The following user(s) Liked this Post: MarkT, Ht1kid
09 Sep 2023 06:28
#14
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart