×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Clutch side cover - DT400 twin shock
- Jammyyammy
- Topic Author
- Offline
- Elite Member
- Posts: 279
- Likes received: 58
Clutch side cover - DT400 twin shock was created by Jammyyammy
Hi - I’ve come to put the clutch side cover back on my DT400 twin shock.
I’ve got the correct gasket.
Should I also use some hylomar blue (non setting gasket + jointing compound) on this or can it go together dry???
Thanks….
I’ve got the correct gasket.
Should I also use some hylomar blue (non setting gasket + jointing compound) on this or can it go together dry???
Thanks….
27 Nov 2021 09:16
#1
Please Log in or Create an account to join the conversation.
- Tinkicker
- Offline
- Site Supporter
- Posts: 752
- Likes received: 1025
Replied by Tinkicker on topic Clutch side cover - DT400 twin shock
Dry.
The following user(s) Liked this Post: Jammyyammy
27 Nov 2021 10:11
#2
Please Log in or Create an account to join the conversation.
- Jammyyammy
- Topic Author
- Offline
- Elite Member
- Posts: 279
- Likes received: 58
Replied by Jammyyammy on topic Clutch side cover - DT400 twin shock
Thanks….
27 Nov 2021 10:25
#3
Please Log in or Create an account to join the conversation.
- Pete-RT1
- Offline
- Platinum Member
- Posts: 924
- Likes received: 1282
Replied by Pete-RT1 on topic Clutch side cover - DT400 twin shock
I smear a bit of oil on mine so that if I need to remove the cover again it comes off with the gasket intact.
I think I picked that tip up from RT325
This image is hidden for guests.
I think I picked that tip up from RT325
This image is hidden for guests.
Please log in or register to see it.
Yamaha CT1-B
Yamaha CT1-C
Yamaha AT1-E
Yamaha AT1-C
Yamaha CT3
1978 Yamaha DT175MX
2020 Honda CB500X
Yamaha CT1-C
Yamaha AT1-E
Yamaha AT1-C
Yamaha CT3
1978 Yamaha DT175MX
2020 Honda CB500X
The following user(s) Liked this Post: RT325
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9674
- Likes received: 3942
Replied by RT325 on topic Clutch side cover - DT400 twin shock
Wrote this but didn't push submit apparently.
Just grease it. Easier to get off next time. If there's case damage then that's a different story.
Just grease it. Easier to get off next time. If there's case damage then that's a different story.
The following user(s) Liked this Post: Pete-RT1, Jammyyammy
27 Nov 2021 15:01
#5
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart