facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

rebore

  • principal282
  • principal282's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 238
  • Likes received: 71

rebore was created by principal282

I decided to buy a 1st oversize kit from enduronut and send in the cylinder to bill bune...
I have been struggling with some thumb/wrist issues (overuse, too dam much phone, email, typing, etc) so i wanted to pull crap off while i was not too balled up today. 

lots of black gooey oil in the cylinder.  I don't think the rings seated right.  

Whilst we are at it, since the doggone thing seems to flood out i am sending off the carb to a reputable shop in wisco for a good going through and bench test.  I also am going to get every doggone speck of rust out of the tank, which i thought was good this summer and now i see maroon garbage again.

very likely will be no additional riding this fall as each thing will take a couple weeks.  If I am lucky it's early November and in this part of the world, this marks the end of that season...
but come next APril baby, we will be ready!


 
The following user(s) Liked this Post: RT325
11 Oct 2021 16:47 #1

Please Log in or Create an account to join the conversation.

Moderators: yamadminMakotosunDEETVinnieJames Hart