×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Moving along - taking the DT360A for engine rebuild
- mrstangblb
- Topic Author
- Offline
- Elite Member
Replied by mrstangblb on topic Moving along - taking the DT360A for engine rebuild
Glad it was a LITTLE cooler yesterday!
Barry
KK4RXN
Jeremiah 29:11-13 / John 3:16
17 Jul 2020 04:11
#11
Please Log in or Create an account to join the conversation.
- Dwatson207
- Offline
- New Member
- Posts: 1
- Likes received: 0
Replied by Dwatson207 on topic Moving along - taking the DT360A for engine rebuild
Hey Steve. I just got a RT2 360 and was thinking about doing a rebuild. Do you have any advice or links to rebuild guides in the forum? From what I can tell the bike currently needs a oil reservoir ( I believe the previous owner premixed) and new battery. Any advice would be much appreciated!
18 Jul 2020 10:41
#12
Please Log in or Create an account to join the conversation.
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1661
- Likes received: 1056
Replied by Mothersbaugh on topic Moving along - taking the DT360A for engine rebuild
Probably should see if the oil pump is still there, too, if the oil tank is missing...
18 Jul 2020 13:03
#13
Please Log in or Create an account to join the conversation.
- nhsteve
- Offline
- Site Supporter
- Posts: 386
- Likes received: 201
Replied by nhsteve on topic Moving along - taking the DT360A for engine rebuild
That left side case looks like someone has been doing a bit of repair work at the rear maybe? Soda does give a nice soft finish, but don't you need to wash it after? I still see seals & bits.
As to a thread for a rebuild, not sure on this "new" site. I believe there was. I'll look around and see if I can find one. Did you try a search? If there isn't, start your own and others will pitch in I'm sure!
As to a thread for a rebuild, not sure on this "new" site. I believe there was. I'll look around and see if I can find one. Did you try a search? If there isn't, start your own and others will pitch in I'm sure!
19 Jul 2020 14:06
#14
Please Log in or Create an account to join the conversation.
- mrstangblb
- Topic Author
- Offline
- Elite Member
Replied by mrstangblb on topic Moving along - taking the DT360A for engine rebuild
We think the chain popped off and the previous owner did some "repair." That was at least 15 years ago if not more.
Barry
KK4RXN
Jeremiah 29:11-13 / John 3:16
19 Jul 2020 15:12
#15
Please Log in or Create an account to join the conversation.
- mrstangblb
- Topic Author
- Offline
- Elite Member
Replied by mrstangblb on topic Moving along - taking the DT360A for engine rebuild
All right - my friend Hondarider has the engine back together and cranked it for the first time tonight. Looking good! I'm going to start another thread with the video and pictures. It needs a good carburetor kit and a brake cable, and it hopefully will be hitting the trails soon.
Barry
KK4RXN
Jeremiah 29:11-13 / John 3:16
17 Aug 2020 16:21
#16
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4039
- Likes received: 1964
Replied by Gr8uncleal on topic Moving along - taking the DT360A for engine rebuild
Use the kits for seals and gaskets only. If you need brassware, buy original Mikuni.
The following user(s) Liked this Post: mrstangblb
18 Aug 2020 00:41
#17
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart