×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT175 MX Mudguard Bushes
- MikeK-uk
- Topic Author
- Offline
- Premium Member
- Posts: 83
- Likes received: 37
DT175 MX Mudguard Bushes was created by MikeK-uk
Good day all!
This isn’t the most exciting of questions/posts…
My plastic rear mudguard has stress fractures where the rear light bolts up.Looking at the parts list, there should be (and isn’t) a top hat section rubber bush. Is this bush supposed to be inserted through the bottom of the plastic mudguard, with the “brim”of the top hat providing a spacer between the metal mudguard support and the plastic mudguard?
Think that’s how it must work but wanted to check before cracking my new mudguard!
Thank you.
Mike
This isn’t the most exciting of questions/posts…
My plastic rear mudguard has stress fractures where the rear light bolts up.Looking at the parts list, there should be (and isn’t) a top hat section rubber bush. Is this bush supposed to be inserted through the bottom of the plastic mudguard, with the “brim”of the top hat providing a spacer between the metal mudguard support and the plastic mudguard?
Think that’s how it must work but wanted to check before cracking my new mudguard!
Thank you.
Mike
20 Jan 2023 19:37
#1
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13388
- Likes received: 9254
Replied by MarkT on topic DT175 MX Mudguard Bushes
I will try to remember to check tomorrow.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13388
- Likes received: 9254
Replied by MarkT on topic DT175 MX Mudguard Bushes
I also believe the inner metal fender is formed to fit tightly to the original plastic outer fender at the taillight mounting points.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
20 Jan 2023 20:54
#3
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13388
- Likes received: 9254
Replied by MarkT on topic DT175 MX Mudguard Bushes
Took a peek in the dark... on the 78-81 model the inner fender is indeed a tight fit to the original plastic fender at the taillight mounting points.
Top hat rubber bushing sit on top of plastic fender and fit into taillight bracket... steel bushings inside.
I will look again in daylight... had to look across crowded shed with small flashlight.
Top hat rubber bushing sit on top of plastic fender and fit into taillight bracket... steel bushings inside.
I will look again in daylight... had to look across crowded shed with small flashlight.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
20 Jan 2023 21:07
#4
Please Log in or Create an account to join the conversation.
- MikeK-uk
- Topic Author
- Offline
- Premium Member
- Posts: 83
- Likes received: 37
Replied by MikeK-uk on topic DT175 MX Mudguard Bushes
Thanks very much! Interesting that plastic sits directly on to the metal mudguard. I have got the collars (not fitted previously) so i guess the absence of them caused the stress fractures rather than absence of a spacer.
Thank you.
Thank you.
21 Jan 2023 03:14
#5
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13388
- Likes received: 9254
Replied by MarkT on topic DT175 MX Mudguard Bushes
Trying to upload my first Imgur pic of underside of original 1979 DT175 rear fender... then in a couple of hours when it is light outside I will try to get pics of top of fender/taillight.
This image is hidden for guests.
This image is hidden for guests.
Please log in or register to see it.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
Please Log in or Create an account to join the conversation.
- MikeK-uk
- Topic Author
- Offline
- Premium Member
- Posts: 83
- Likes received: 37
Replied by MikeK-uk on topic DT175 MX Mudguard Bushes
Thanks very much for that!
Mike
Mike
21 Jan 2023 07:26
#7
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart