Not having any luck locating a nos oe brake cable for my DT3. 
Does anyone have one in their stash that could take a picture
of the boot (bellows) on the cable and post it or send it to me. 
If I can find a boot for it, I think I can save the cable as the 
housing looks ok. Thanks again, D


 

 

Thank you. Now to find one of the boots! Unless of course you have more
of these than you need :-)

Boots are hard to find. Also I have never had any luck getting the small boot over the large cable end without ripping it. Maybe heat it with a heat gun and plenty of silicone lube. I will check and see what i have left for cables. Don't think i have any extra's to sell at the moment. 

I have the cable apart. A Beck-Arnley cable has a boot like that on it and I have
a cable like that but didn't want to take it off if I can help it. I may just run one of
the aftermarket cables until a oe one shows up. If you would check your stock
I would appreciate it. BTW, I have a couple of the steering dampner rods nos
for the 68-70 250's if you are ever in need. Thanks, D

Give Dave a call at KDI , see if he can get you the rubber boot.
He puts them on his front brake cables as seen here..

www.kdirepros.com/Front-Brake-Cable-p/214-26341-00.htm

oh, and tell him I sent you !

I have one of his cables. They are nice replacements, just not like oe.