AT3 removing the rotor - changing the brishes - Page 2

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

AT3 removing the rotor - changing the brishes

Chajoma
Topic Author
Offline
Premium Member

Posts: 124
Likes received: 41

Replied by Chajoma on topic AT3 removing the rotor - changing the brishes

Shyted, you are smart. I have the workshop manual but haven't looked so I am dumb.

Last edit: 09 Jul 2021 04:14 by Chajoma.

09 Jul 2021 04:11 #11

Please Log in or Create an account to join the conversation.

Chajoma
Topic Author
Offline
Premium Member

Posts: 124
Likes received: 41

Replied by Chajoma on topic AT3 removing the rotor - changing the brishes

SWOOP56, I suspected as much. Any idea where I can get the tapered bolt tool from? I'll have a search myself...

Last edit: 09 Jul 2021 04:15 by Chajoma.

09 Jul 2021 04:13 #12

Please Log in or Create an account to join the conversation.

RT325
Offline
Platinum Member

Posts: 11021
Likes received: 4844

Replied by RT325 on topic AT3 removing the rotor - changing the brishes

It's not tapered, just parallel. One in my pic is genuine from when i worked at the Yam dealer. Fits any of the armature models twins & singles by memory--only one i've ever used anyway.

09 Jul 2021 04:39 #13

Please Log in or Create an account to join the conversation.

RT325
Offline
Platinum Member

Posts: 11021
Likes received: 4844

Replied by RT325 on topic AT3 removing the rotor - changing the brishes

Rendering Error in layout Message/Item: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=381789688313&version=889&trackingid=&trackingpartnercode=9): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known. Please enable debug mode for more information.

Please Log in or Create an account to join the conversation.

Chajoma
Topic Author
Offline
Premium Member

Posts: 124
Likes received: 41

Replied by Chajoma on topic AT3 removing the rotor - changing the brishes

UPDATE: I managed to get the correct puller from my local Yamaha dealer. It all came apart OK and the new seal is fitted.

And it has cured my tick-over problem - woohoo!

Unfortunately I haven't managed to fix my charging problem at the same time. I've started a new topic on that one...

06 Aug 2021 08:50 #15

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart

NOTICE: If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

Pictures Posting Not Working (12 Jun 2023)