×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Fuel tap repair kit
- MarkT
- Offline
- Site Supporter
- Posts: 13392
- Likes received: 9259
Replied by MarkT on topic Fuel tap repair kit
Does it matter what the throttle opening is when it "bogs down" at 5,000 RPM? (You should be able to rev to redline at very low throttle openings)
If not, then it's an almost certainly an ignition issue.
If not, then it's an almost certainly an ignition issue.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: mdscott
18 Oct 2020 07:36
#21
Please Log in or Create an account to join the conversation.
- wayno
- Topic Author
- Offline
- Premium Member
- Posts: 88
- Likes received: 10
Replied by wayno on topic Fuel tap repair kit
Cannot get the bike out now(in work) but it bogs down in top gear rolling the throttle on and also in lower gears accelerating hard
18 Oct 2020 08:49
#22
Please Log in or Create an account to join the conversation.
- wayno
- Topic Author
- Offline
- Premium Member
- Posts: 88
- Likes received: 10
Replied by wayno on topic Fuel tap repair kit
Just tried the bike revs to between 5-6k revs before starting to bog at a 1/4 throttle.
Please Log in or Create an account to join the conversation.
- DEET
- Offline
- Moderator
- Posts: 1403
- Likes received: 1279
Replied by DEET on topic Fuel tap repair kit
You shelled out a lot of money for the CDI system... why not give them a ring and ask them what is wrong?
Or ask them for a replacement.
Or ask them for a replacement.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Where the Yamaha Enduro is still a current model...
Where the Yamaha Enduro is still a current model...
18 Oct 2020 16:32
#24
Please Log in or Create an account to join the conversation.
- wayno
- Topic Author
- Offline
- Premium Member
- Posts: 88
- Likes received: 10
Replied by wayno on topic Fuel tap repair kit
Rang them this morning, said I had a problem, just said send it back, didn't seem interested in what was wrong until I made a point of telling him then said sounds like carburattion. Carb been checked twice and is ok, going to whip it off later.
19 Oct 2020 01:34
#25
Please Log in or Create an account to join the conversation.
- DEET
- Offline
- Moderator
- Posts: 1403
- Likes received: 1279
Replied by DEET on topic Fuel tap repair kit
Hopefully they will send you one that works.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Where the Yamaha Enduro is still a current model...
Where the Yamaha Enduro is still a current model...
19 Oct 2020 06:06
#26
Please Log in or Create an account to join the conversation.
- asco
- Offline
- Site Supporter
- Posts: 1222
- Likes received: 446
Replied by asco on topic Fuel tap repair kit
May I Suggest A new STICKY:
Rex's Speedshop Horror Story's
Ignitions that don't work/
YAMA-LAND RESTORATION,
( 818 ) 521-2109
This email address is being protected from spambots. You need JavaScript enabled to view it.
1971 CT1-C (BRANDY)
1970 DT1-C (MONICA)
1972 AT2M (ZIFFLE)
1970 CT1-B (HULK)
1971 DT1E (GINA)
1970 CT1-B (CLIDE)
( 818 ) 521-2109
This email address is being protected from spambots. You need JavaScript enabled to view it.
1971 CT1-C (BRANDY)
1970 DT1-C (MONICA)
1972 AT2M (ZIFFLE)
1970 CT1-B (HULK)
1971 DT1E (GINA)
1970 CT1-B (CLIDE)
20 Oct 2020 09:51
#27
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart