facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

New member

  • Posts: 1
  • Likes received: 0

New member was created by Lance

Hi from Tasmania Australia after a very long time of advertising and searching for a 1971 DT1F here in tassie I finally found one rare as hens teeth in  
17 May 2025 15:37 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14446
  • Likes received: 10686

Replied by MarkT on topic New member

Welcome!

And just FYI, DT1F is not a model...  it's a VIN number prefix that was used for several years of DT1, DT2, and DT3...  Some major changes were made during those models so always best to look up the full VIN in the charts in the Tech Library to ID what you have.

Also most information seems to be on the USA models...  In Australia there might be differences as it seems your country got a variant that was closer to what we call the "Japanese Domestic Market" (JDM) spec.  Wiring and such might have differences from the common USA diagrams out there. 

(1971 was technically the DT1E with the possibility of a close ratio transmission depending on the VIN.)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: swm, Ht1kid
17 May 2025 17:19 #2

Please Log in or Create an account to join the conversation.

  • Posts: 1596
  • Likes received: 955

Replied by Ht1kid on topic New member

Greetings from Tennessee USA  

This image is hidden for guests.
Please log in or register to see it.

17 May 2025 17:38 #3

Please Log in or Create an account to join the conversation.

Moderators: yamadminMakotosunDEETVinnieJames Hart