facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

DT250B standard spring rates?

  • Von
  • Von's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 49
  • Likes received: 18

DT250B standard spring rates? was created by Von

Maybe someone here will know, what are the standard spring rates on the DT250B in either N-M or Ib -inch ?
Thanks, Tom
The following user(s) Liked this Post: MACE6772
19 Sep 2020 06:59 #1

Please Log in or Create an account to join the conversation.

  • Posts: 206
  • Likes received: 150

Replied by MACE6772 on topic DT250B standard spring rates?

I too need this answered. I am looking to have new springs made for resale.:Subscribe
76 Dt 125 75 Dt 175 75 Dt 250 75 Dt 400 09 FZ6R
19 Sep 2020 07:28 #2

Please Log in or Create an account to join the conversation.

  • Posts: 1120
  • Likes received: 696

Replied by Swoop56 on topic DT250B standard spring rates?

Front or rear ?
20 Sep 2020 00:33 #3

Please Log in or Create an account to join the conversation.

  • Posts: 392
  • Likes received: 248

Replied by Hammer on topic DT250B standard spring rates?

Von,

Do you mean for the DT-1B, vice the later DT250s? Just curious.

Hammer
Who, More than Self, His Country Loved.
20 Sep 2020 00:47 #4

Please Log in or Create an account to join the conversation.

  • Von
  • Von's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 49
  • Likes received: 18

Replied by Von on topic DT250B standard spring rates?

1975 DT250B rear springs.
20 Sep 2020 01:43 #5

Please Log in or Create an account to join the conversation.

  • Posts: 1120
  • Likes received: 696

Replied by Swoop56 on topic DT250B standard spring rates?

My DT 250 B Specification sheet has these figures .
Free length 224.4 mm
Spring rate K1 = 1.42 kgs / mm
K2 = 2.6 kgs / mm

Hope that helps , but probably not exactly what you were hoping to get .
The following user(s) Liked this Post: MACE6772, Von
Last edit: 21 Sep 2020 02:04 by Swoop56.
21 Sep 2020 02:03 #6

Please Log in or Create an account to join the conversation.

  • Posts: 17
  • Likes received: 12

Replied by Shane86 on topic DT250B standard spring rates?

I measured my DT250A springs at 75 lb per inch for each spring. This is a little less than the spec sheet but close. I also think some springs have a dual rate coil
The following user(s) Liked this Post: MACE6772, Von
21 Sep 2020 18:19 #7

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart