Hey guys, I bought an aftermarket flasher for my DT2 and was wondering how I wire it.  See pictures below but basically the poles are marked B and L, my wires are brown and brown/white.  Thanks for the help, not much on wiring issues as you've no doubt figured that out

  

Brown to B
Brown/white to L

Thank you Mark! 

In general I believe when you have a two connection flasher relay the spade B connects to the live circuit (Brown for your DT2) whilst the L spade is connected to the wire feeding the indicator switch (Brown/White for your DT2)

Thank you Andy, I just connected it a while ago and that's how I wired it.