×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Dt360 forks on an at1?
- Yamahonda
- Topic Author
- Offline
- Junior Member
- Posts: 10
- Likes received: 8
Dt360 forks on an at1? was created by Yamahonda
Will 1974 dt360 triple clamps fit on an at1 frame?
16 Jan 2021 15:54
#1
Please Log in or Create an account to join the conversation.
- Makotosun
- Offline
- Administrator
Replied by Makotosun on topic Dt360 forks on an at1?
I believe most all of the enduro triples will fit any of the enduro frames and some others. I know a friend of mine put DT1 forks on his AT1 so the steering head should be the same length. I know it has been done on the site, but I don't have a thread.
IF it isn't one thing, it's another.
17 Jan 2021 10:12
#2
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13392
- Likes received: 9258
Replied by MarkT on topic Dt360 forks on an at1?
Yamaha changed the gauge bracket mount spacing on some models and of course the original headlight ears won't fit over the larger forks... fender and of course wheel/axle is different... nothing insurmountable... just depends on what you're doing and how close to original you want it to look when done...
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Rick C.
17 Jan 2021 11:12
#3
Please Log in or Create an account to join the conversation.
- Yamahonda
- Topic Author
- Offline
- Junior Member
- Posts: 10
- Likes received: 8
Replied by Yamahonda on topic Dt360 forks on an at1?
Thank you so much, this will make a big difference for me!
The following user(s) Liked this Post: t-bone
17 Jan 2021 11:44
#4
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart