×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Headlight replacement
- Stem
- Topic Author
- Offline
- New Member
- Posts: 2
- Likes received: 0
Headlight replacement was created by Stem
I have a rt2 and need a new headlight glass and bulb. Is there a replacement / modification available?
02 May 2024 20:13
#1
Please Log in or Create an account to join the conversation.
- pahiker
- Offline
- Premium Member
- Posts: 72
- Likes received: 55
Replied by pahiker on topic Headlight replacement
Do you want another sealed beam? If so, the below site has something that should work. I used a replacement 5.75 inch shell so I could run H4 bulbs and ditched the sealed beam.
normanlamps.com/4020.html
If you haven't already done so, install a voltage regulator per the below tech bulletin to prevent blown headlamp bulbs.
yamaha-enduros.com/index.php/service-bul...e-voltage-regulators
normanlamps.com/4020.html
If you haven't already done so, install a voltage regulator per the below tech bulletin to prevent blown headlamp bulbs.
yamaha-enduros.com/index.php/service-bul...e-voltage-regulators
1973 Yamaha RT3
2024 Suzuki DR650
2023 Triumph Tiger 1200 GT Pro
2024 Suzuki DR650
2023 Triumph Tiger 1200 GT Pro
The following user(s) Liked this Post: DVM, Sneezles61
03 May 2024 02:15
#2
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4058
- Likes received: 1990
Replied by Gr8uncleal on topic Headlight replacement
Also have a read of this thread from post#5 onwards.
1971 Yamaha DT1E 250 Headlight Cicuit - Vintage Enduro Discussions (yamaha-enduros.com)
1971 Yamaha DT1E 250 Headlight Cicuit - Vintage Enduro Discussions (yamaha-enduros.com)
03 May 2024 02:47
#3
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13561
- Likes received: 9394
Replied by MarkT on topic Headlight replacement
A standard 5 3/4" H4 reflector or sealed beam will fit just fine in the stock rim. You simply use "W" clips from Yamaha or someplace like MikesXS.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: DVM, Ht1kid
03 May 2024 04:51
#4
Please Log in or Create an account to join the conversation.
- Stem
- Topic Author
- Offline
- New Member
- Posts: 2
- Likes received: 0
Replied by Stem on topic Headlight replacement
Thanks much for the information.
03 May 2024 08:13
#5
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart